Do you have stepper motors with brakes

Do you have stepper motors with brakes? Yes, I have!

Our company supplies 42mm, 57mm, 86mm three series, 30 seconds off the power brake, industry leading, click on the brake stepper motor can go to the corresponding webpage for details.

Do you have stepper motors with brakes? Before asking this question, you should know why the stepper motor has brakes. Yes, the stepper motor we commonly use is not available, but for equipment that needs to be stopped immediately when the power is off, the brake must be used, especially for vertical motion mechanisms. So, can you not step motor brake? It is also possible, the brake function itself is generated in response to demand, if you do not want to remove it.

Let's popularize the relevant principle: ordinary stepper motor power will not self-lock, power on will self-lock, to achieve power off self-lock, need to install a brake device in the tail of the stepper motor (brake device), when the motor is powered on, the brake is also powered on, the brake device is removed from the stepper motor output shaft, the motor runs normally, when the power is off, the brake release tightly hugs the motor shaft. The brake holding device needs to be connected to 24V DC power supply, and the brake power supply needs to be synchronized with the drive power supply to open or shut off, so that the motor loses self-locking brake power is effective, and the electric brake fails to turn the motor.

If you do not know how to wire this stepper motor with brake after purchase, you need to bring brake stepper motor wiring diagram or product 3D drawings, the company's customer service and technical department colleagues will help you solve! Technical service hotline: 400-960-1069