Which is more expensive, servo or stepper motor?

Which is more expensive, servo or stepper motor? Obviously, servos are expensive, a lot more expensive!

In the case of ensuring the normal use of equipment, how to better control the production cost to achieve more market competitiveness is a difficult problem in front of engineers. So when to use servo and when to use stepper?

Expensive have expensive reason, cheap have cheap value, choose suitable for their own is good. If the design of the equipment requires fast speed, high precision, feedback to the control, strong anti-overload ability, need a variety of control modes, acceleration and deceleration faster, then choose servo is the inevitable choice. If the speed requirement is not high (now it can be achieved with high precision), no feedback signal is required, and the control is simple and convenient, then it is necessary to step forward.

Which is more expensive, servo or stepper motor? We recommend only buying the right ones! Focusing on the stepper motor for more than 10 years, Kaifu, when you can not decide which parts to use, the technical engineer of 5 years will give you reasonable advice!