Stepper motor for helmet and helmet sprayer

The stepper motor for safety hat spraying machine mainly uses 57 series stepper motor, which is two-phase DC type, divided into single shaft and double shaft two ways (safety hat spraying machine mainly uses single shaft stepper motor), in line with Rosh certification. The holding moment ranges from 0.57 to 2.4N.m, and the inertia ranges from 145 to 470g.cm², which can be selected according to actual application. The step Angle is 1.8°, the Angle error is ±0.09°, the insulation voltage is 500V AC/ min, the insulation resistance is 100ω, the motor surface can withstand the high temperature of 100℃. Can change the wiring mode according to the need to achieve the change of torque, product exquisite technology, large torque, low noise, smooth operation, for the company's best-selling classic!

Safety hat spray machine equipment is diverse, we usually see this high-practical, slide frame & stepper motor frame, because the load is light, so the safety hat spray machine with a stepper motor without the use of brakes. Simple installation, convenient debugging, accurate positioning.

Free technical service hotline: 400-960-1069, more safety hat spray machine with the stepper motor solution with the motor please consult!