Stepper motors and drivers for mask nose strip equipment

In the complete set of production equipment of the automatic mask machine, the transmission speed control of the mask nose bridge strip and the positioning and cutting of the standard size need to be coordinated by the stepper motor. This part seems simple, but the linkage is not easy, which is why many people are consulting how the nose bridge strip is fixed on the mask. In fact, there are two main solutions, 1 is placed in the mask machine when the protective dust is superimposed (generally used for flat type), 2 is the mask molding through the welding machine (lamenting machine) fixed (mainly used with folding, cup, bowl and other special-shaped structure), about these two solutions, we can mature corresponding.

According to different schemes, we recommend the use of 57mm flange stepper motor and driver: Y07-59D1-17156D /Y2SD2, Y07-59D1-17155 /Y2SD2, in addition, there are some will use 86 motor: Y09-59D3-7655-P/Y2SD3-F01. The specific situation can be consulted online customer service or call the company telephone: 0769-23033384 consultation.

Related products: speed regulating motor for mask machine, reducer motor for mask machine, fixed speed motor for mask machine