Mask machine _ Mask machine feeding motor

Mask mechanical machine specifications:

(1) Gear reduction motor, divided into CH (horizontal), CV (vertical) two kinds;

(2) Output shafts are 18, 22, 28, 32, 40, 50;

(3) Output power: 100W, 200W, 400W, 750W, 1500W, 2200W, 3700W

(4) Gearbox reduction ratio: 3, 5, 8, 10, 15, 20, 25, 30, 40...... 1000, 1800

(5) Number of voltage poles:

Single-phase: 110V, 220V; Frequency: 50HZ/60HZ

Three-phase: 220V-240V, 380V-415V; Frequency: 50HZ/60HZ

(6) Can be equipped with brakes (power off brake and manual brake)

(7) Protection grade: Aluminum alloy shell junction box IP54; The iron junction box is IP20

(8) Shell material: 100W~2200W shell is aluminum alloy, 18, 22, 28 gear box is aluminum alloy material; Gear boxes 32, 40 and 50 are made of cast iron.

(9) Working mode: continuous operation

(10) Use environment: temperature -10 degrees ~+40 degrees; Humidity above 90%.

(11) After sale: The company's products from the date of sale, non-human damage in the case of all products warranty for 18 months.

(12) Features: high reliability, long service life, instantaneous positive and negative rotation, power off braking, etc.

(13) Advantages: It has the advantages of fast delivery and large reserve.

(14) Operation: transmission, cleaning equipment.

Mask mechanical features:

(1) 100% all-copper motor, large torque, small size, long service life, low noise, low power consumption.

(2) The reducer all uses ball bearing transmission efficiency is high and not easy to grind.

(3) Gear reduction box filled with anti-wear and low-temperature grease (+ 120℃ --40 ℃), precision machining of imported equipment from Germany, factory price direct sales, quality assurance.

【 High reliability 】

The electromagnetic scheme optimized by ANSOFT MASWELL software ensures high operating efficiency and low temperature rise.

B class 130 degree enamelled wire and insulation material, safe and reliable;

Using low loss silicon steel sheet and precision stamping technology, high precision, low loss.

subwoofer

Adopt high precision CNC hobbing machine and high grade hob to hand over high precision helical gear, accuracy up to IS06-7 level

Box precision CNC machining, concentricity, position accuracy up to IS06-7 level

High rigid box structure, even under high load conditions is also strong without deformation, small vibration.

【 Long life 】

Gear material is made of high-grade aluminum alloy, and plasma carburizing heat treatment, to ensure the hardness of the gear surface, internal toughness, wear-resistant teeth

All reducer boxes are made of ball bearings

Mask mechanical machine material description:

1) The rotor shaft material is 40Cr, high frequency quenching HRC50-55 after rough rolling of the teeth, twice scraping of the hard tooth surface, and the gear accuracy can reach ISO6-7 level.

2) The shaft gear material is 20CrMnTi, high-frequency quenching HRC58-61 after rough rolling of the teeth, secondary scraping of the hard tooth surface, and the gear accuracy can reach ISO6-7 level.

3) Disc gear material is 40Cr, high frequency quenching HRC48-51 after rough rolling of teeth, grinding teeth, gear accuracy can reach ISO6-7 level.

4) Box: 1#, 2#, 3# box outlet shaft is 18, 22, 28, aluminum alloy material;

4#, 5#, 6# box outlet shaft is u32, 40, 50, using cast iron material.

5) Gear: material is 40Cr, tempering is HB280, high-precision hobbing, teeth high-frequency quenching HRC50, tooth surface grinding, gear accuracy 6.

6) Gear shaft: gear material 20CrMnTi, high precision hobbing, carburizing quenching HRC60, tooth surface twice scraping, precision 6.

7) Motor shaft: gear material 40Cr, tempered HB280, high-precision roller, teeth high-frequency quenching HRC54, tooth surface twice scraping, precision 5-6.

8) Bearings: Some bearings of the motor use high-precision grade precision bearings to ensure long-term operation life.

This CH28-750-15-S product is known as the feeding motor of the mask machine, because it plays an irreplaceable role in the mask mechanical machine, we also supply the mask machine stepper motor, the mask machine speed regulation motor, the mask machine speed reduction motor. If you need to consult on the selection of CH28-750-15-S mask machine feeding motor, you can call or ask online.