Stepper motor driver manufacturer

Through more than 10 years of efforts, the company has become a veritable stepper motor drive manufacturer, from the location of the stepper motor drive plant, talent introduction, equipment investment, testing, mass production, market verification and recognition, all the way hard and fruitful. The company has been assessed as a high-tech enterprise by Dongguan City government, and the drive series has also been identified as a high-tech product. In order to protect knowledge products, we have also applied for a large number of related invention patents, utility model patents and software patents. The following is an overall overview of the stepper motor drives sold by the company:

SD series: DC pulse control type

Two phase/three phase pulse type DC stepper motor driver, support pulse & direction mode and CW/CCW mode, there are three input voltage segments to choose from: 12-48VDC, 24-48VDC, 24-75VDC, the maximum optional microstep subdivided into 25600step/rev. Suitable for 20-57mm motor.

SA series: AC pulse control type

Includes Y2S3060 series, is a two-phase/three-phase pulse type AC stepper motor driver, the input voltage range is 80-265VAC, supports pulse & direction mode and CW/CCW mode, and the maximum optional microstep subdivision is 25600step/rev. Suitable for motors 86mm and above

The above two series have idle current reduction, low speed domain anti-resonance, input signal filtering, dip microstep subdivision, self-check error reporting and other features.

EEDC series: AC/DC bus control type

Two-phase high-performance bus DC stepper motor driver with integrated intelligent motion controller function. Two input voltage segments are available: 18-48VAC, 24-480VDC, respectively support SCL instructions, Modbus, CANopen, eSCL instructions, Modbus RTU,EtherNet/IP, EtherCAT, PROFINET protocol,Q programming, can be called through a variety of bus communication instructions.

EPD series: DC pulse control type

Two-phase/three-phase stepper motor driver pulse + direction/positive and negative pulse control mode, input voltage 24-80VDC, EN control high/low level, static current 30%/70% optional, with open loop step loss alarm and multiple electrical protection functions, suitable for 20-86mm two-phase/three-phase stepper motor.

EEDO series: DC bus control type

Two-phase stepper driver, input voltage 24-80VDC, EtherCAT bus communication open loop control, equipped with SCI interface, 4 digital input, 2 digital output; Supports compensation position control, Profile/Cyclic position control, origin reset, and Profile/Cyclic speed control.

Believe that science and technology, advancing with The Times, the stepper motor driver manufacturers stronger and bigger is the direction of our struggle, and we sincerely recruit regional agents to join us to create brilliant!